CARROLL TOUCH Appendix A - Smart-Frame Protocol Command Reference
Touch System Programmer’s Guide A-39
Tracking_Mode (26H) (&)
Command Description
When the touch mode is set to Tracking Mode by sending the
Tracking_Mode (26H) command, the touch system sends Touch
Coordinate Reports to the host as long as the stylus is moving in the
touch active area. The touch system tracks the stylus, sending Touch
Coordinate Reports to indicate the current stylus position as it moves
through the touch active area. The touch system stops sending Touch
Coordinate Reports when the stylus is stationary, and resumes sending
Touch Coordinate Reports if the stylus begins to move again.
Tracking Mode is fundamentally identical to Continuous Mode except
that the touch system does not send redundant Touch Coordinate
Reports when the stylus is stationary. Tracking Mode is used in
applications where cursor positioning is required, such as graphics
applications. Tracking Mode is the system default touch mode.
Report Format
See Coordinate Reporting (23H) in this appendix for the format of the
Touch Coordinate Report and Non-Contiguous Coordinate Report.
Example
See Coordinate Reporting (23H) in this appendix for examples of the
Touch Coordinate Report and Non-Contiguous Coordinate Report.
See Also
Coordinate_Reporting (23H)
Comments to this Manuals